SA-C23 CORE (hal etu2)

Specna Arms SA-C23 CORE™ HAL ETU™ Gen.2 airsoft Carbine

The SpecnaArms Core Gen.2 series of carbines was created to provide the best possible user experience at an attractive price. Based on experience, passion, commitment, the series has been redesigned for even better performance that will allow the user to take a factory product out of the box that is up to any task on the airsoft field.

To this end, the Core Gen.2series has been equipped with, among others:
– Rotational Hop-Up TDC Magnus™ chamber (Top Down Center) allowing a very accurate and stable adjustment (covered by the European Patent number 015052069-0001)
– Helium™ Flat Hop Eraser, which will improve the stability of the ball’s undercurve
– Aluminium sealed nozzle
– Æther™ Gearbox – reinforced frame (covered by European Patent number: 015044865-0001), equipped with:

• Mainspring release function
• Pre-cocking and AoE inspection windows
• Reinforced front
• Inspection windows for easy priming
• Trigger adjustment function
• Screw holes for frame alignment

 

Features of the HAL™ system:

• trigger detection based on magnetic sensors and Hall effect
• active brake
• binary trigger
• adjustable trigger sensitivity (5 levels from 20 to 100%)
• adjustable pre-cocking (6 levels)
• AUTO programmable fire modes (full auto, semi, 3-rd burst, 5-rd burst)
• SEMI programmable fire modes (semi, binary, AUG, sniper)
• easy programming via trigger
• low battery alarm
• compatible with brushless motors

The body, the slide and the SF battery compartment, as well as the pistol grip, are made of nylon fibre-reinforced polymer. Other components, such as the barrel, front, suppressor and the stock are made of nylon fibre-reinforced polymer. other components, such as the barrel, the front of the replica, the flame suppressor, the enlarged reloading handle and the tactical sling assembly are made of metal (all screws, pins, the cartridge ejection window and the dummy lock are made of steel).

The replica is very well-fitted and the user will not notice any play between the upper and lower parts of the body. The use of lightweight polymer body allowed to reduce the weight, which makes it perfect for dynamic games or prolonged milslims. Furthermore, the fibreglass reinforcement also makes the body stronger than polymer and metal bodies.

The replica uses the quick spring change system, ESA™. This allows quick and efficient adjustment of the replica’s power to the conditions expected on the field of play without the need for access to a workshop or a number of specialised tools – simply unscrew the butt guide to reveal access to exchange the spring without having to pull out or disassemble the gearbox.

The advantages of the ESA™ system are difficult to overstate. In view of the arrangements within the environments themselves, this system guarantees the user considerable possibilities and a great deal of freedom. The ESA™ system makes it possible, with a minimum of time, to change the mainspring and thus to adapt the replica’s discharge speed to the area of play, so as to guarantee an ideal compromise between the effectiveness of fire control and the safety of oneself and other players.

The replica has been fully adapted to work with LiPo and LiFe type batteries. With a base initial discharge velocity of ~390 FPS guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium range operations. An M90-type spring is also included, which allows to reduce the initial velocity to ~310 FPS, thus making the replica perfectly suited for short-range or indoor operations.

The replica is equipped with a front M-LOK rail and an adjustable buttstock. A folding sight has been fitted on the upper RIS rail, which does not interfere with the optoelectronic aiming devices. Thanks to the extendable buttstock finished with an anti-slip textured foot, it is possible to adjust the length of the replica to the build and the shooter’s preferences. The standard flame suppressor is mounted on a 14-mm left-hand thread, which makes it possible to attach a sound suppressor in its place.

Package include:

• 2 x mid-cap S-MAG magazine
• Cleaning rod
• Replica
• Allen key
• Small Tamyia – Deans adapter
• BBs speedloader
• M90 additional spring

 

Package exclude:

• Battery nor charger

NOTE!!!

When starting the replica for the first time, immediately after connecting the batteries, hold the trigger in SAFE mode for about 5 seconds to activate the HAL™ module

Weight	2,4 kg
Dimensions	88 × 30,5 × 9,5 cm
Body material	Polymer/Metal
Gun length	78 cm
weight	2360 g
Inner barrel length	260 mm
Energy	1,2 J
Full auto	Yes/Programmable
Blowback	Non-Blowback
Hopup	Adjustable
Mag. Capacity	2x 125 BBs
Battery & charger	Not included